Slim fit
Cut close through the chest and noticeably tapered at the waist, usually with narrower sleeves. Creates a sharp, modern outline on slimmer builds, but should never pull across the buttons.
The Formal Shirt Guide · Fit, Cut & Silhouette
Colour and fabric catch the eye first, but fit determines whether a shirt looks polished. The same shirt in two different fits can make the same man look sharp or careless. These are the principles to look for.



The four common fits
Fit names are not standardised: one maker’s “slim” can be another’s “regular”. Use these descriptions as a general guide, and always judge a shirt by how it sits on your own body.
Cut close through the chest and noticeably tapered at the waist, usually with narrower sleeves. Creates a sharp, modern outline on slimmer builds, but should never pull across the buttons.
A balanced cut with some shaping at the waist and comfortable room through the chest. Suits most builds and most occasions, and is the safest starting point.
Generous through the body, with a straight fall from chest to hem and fuller sleeves. Prioritises comfort and freedom of movement; ideal for broader builds and long days.
A modern middle ground, trimmer than regular but less tapered than slim, often with a slightly shorter body that can also be worn untucked with smart-casual outfits.
Practical guidance · Ten checkpoints
Buttoned, the collar should allow roughly one or two fingers between neck and cloth. Tighter will be uncomfortable; looser will look sloppy under a tie.
The shoulder seam should sit at the edge of your shoulder bone, not hanging down the arm and not pulled up onto the neck. This single point anchors the whole shirt.
Buttons should lie flat with no pulling or X-shaped creases. You should be able to cross your arms without strain, with no excess cloth billowing either side.
With arms relaxed, the cuff should reach the base of the thumb and sit at the wrist bone. Under a jacket, around a centimetre of cuff showing is a traditional, polished proportion.
Some taper prevents cloth gathering above the belt. Too much taper pulls when seated. When tucked in, the shirt should look smooth, not ballooned.
A shirt intended to be tucked should be long enough to stay tucked when you raise your arms. Shirts worn untucked should generally end around mid-zip of the trousers.
Reach forward and lift your arms. A well-fitting shirt allows this without the body pulling out of the trousers or the collar riding up. Higher armholes often help.
Slim shirts pair naturally with tapered trousers; fuller shirts with straighter cuts. Keeping shirt and trouser volumes in proportion creates a continuous, balanced line.
Vertical stripes and darker tones can visually lengthen; lighter colours and horizontal emphasis broaden. Use fit and pattern together to balance your natural proportions.
Sit down. If the buttons gape or the collar tightens, the shirt may be too slim for daily wear. A shirt has to look good across a whole day, not just when you are standing.
Reading a shirt on the hanger
Before you try a shirt on, the hanger reveals a lot. Look at the slope and width of the shoulders, how sharply the sides curve in towards the waist, and the length and curve of the tail.



Before you decide
Sizes vary between makers, so always try a shirt on. When you visit Options Mall, you can compare sizes and cuts in person.